4" X 6 5/8" DuraVent DirectVent Pro Chimney Conversion Kit 46DVA-KCA

Chimney Conversion Kit A (includes: Cap Adapter, Retro Connector) - These are
the top and bottom adapter components in a direct vent class A Chimney conversion.
Note that there are many different brands of class A chimney out there and that
specific adapter fit on these different sized brands of pipe. Check the list here for,br> the kit your should get. These adapters will fit best on the following brands.6"
SECURITY CHIMNEY6" METALBESTOS6" JACKES-EVANS6" HART & COOLEY6"
PRO JETThe top cap adapter will transfer your 4" aluminum liner back into a true ,br> direct vent for the acceptance of the direct vent high wind cap. The black components
does the same thing at the bottom on the interior side. It attaches to your class A
factory built chimney on the inside of the home. Between the two you run your 4 inch
aluminum liner. Add the Direct vent high wind cap at the top and finish off at the bottom
with the wall thimble and Direct vent black pipe from the stove to the chimney.